The Easiest Way To Spray Paint Your Car – Spray Painting
If you genuinely think that you want to paint a car then get ready for a full task ahead of you. It does not mean that you can’t or should not do it, it just signifies be sure you are ready to see the job done from beginning to end. If you dont finish the job completely or the right way then you are going to be driving something that would be a bit embarrassing to the eye at least.
To paint a car takes careful planning and ensuring that you’ve all of the supplies you require and the time to go through at least a couple of the stages.
There’re things that youre going to need by way of supplies. You’ll need masking tape, dust mask, goggles, sand paper, wax/grease remover, primer paint, paper for covering, car wash and detergent, paint sprayer, putty with knife.
When you buy your sand paper be certain you purchase fine and thick grit, as you might need both textures. The amount of primer and urethane based paint you require would be dependant on the size of your vehicle. Whether or not you want to use a paint sprayer is up to you, if you choose not to then the average spray paint cans will do fine. Make sure you wear appropriate clothing when you go to paint a car so your skin is not revealed.
Lastly make sure you’ve the right space to work in. You need to be able to work around your car. You most certainly need good ventilation, and you’ll need to be capable to protect it against the elements.
Firstly you must really wash your car throughly. It doesn’t matter how clean it may look to you unless you just washed it, there’ll be some debris on it that you must get rid of, otherwise the paint will not adhere properly. Then once youve it washed nice and clean you have to get every of the old wax off it so thats where the wax/greaser remover comes in. Its very crucial you go through these steps when you go to paint a car.
You’ll in all likelihood notice that you have a couple of rough spots on your latest finish. Say you go to paint a car that is in this condition, you’ll not get good coverage with the new paint. Put little pit marks caused by stones or things like that just use a little putty to fill them in. The use the sand paper to gently smooth the rough spots and small holes. Make sure you rub out all the debris from sanding.
In order to paint a car, you must be absolutely certain that it is dry after your washing. This’ll take a few hours. Be certain it does not get dirty once more. Next masking tape off the areas that you dont want to get paint on.
Totally prime the car. Then sand it lightly once more. Be certain to wipe the residue off.
Now you’re ready to apply the base coat of the new colour. Preferably with a spray gun. Totally spray it then let it dry for about 15 minutes. Then you could apply the second coat. Most often you can get away with 2 coats.
Let it dry for about 1 hour then you can apply the clear coat. Let dry fifteen minutes then re apply. You will probably need about 3 coats of the clear to get a good finish.
Visit SprayPaintSecrets and get your hands on a comprehensive step-by-step course that leads you by the hand and reveals all the secrets of professional paint spray cars tips. Learn how to spray paint a car now.
*
